cSingle point of Visibility, Access and Connectivity for one to thirty-two Serial devices and up to 255 IP Network Elements.

Serial access is provided with a physical connection between an SA-8000 Serial Access Gateway and the network element. IP access is through a browser window that allows registering IP enabled network elements and provides a connection button. A separate Ethernet hub or switch will be required to provide physical connectivity to the Ethernet devices.

• SA-8001            1 Serial,   255 IP (Ethernet)
• SA-8004            4 Serial,   255 IP (Ethernet)
• SA-8008            8 Serial,   255 IP (Ethernet)
• SA-8016          16 Serial,   255 IP (Ethernet)
• SA-8032          32 Serial,   255 IP (Ethernet)

 

• Visibility
  
  
• Fast identification and access to Network Elements
• View Network Elements
• System TID
• NE Description
• Location/CO
• Group Code
• Access
  
  
• Secure access - Web based Browser access (Internet Explorer 4.0 or greater, select IP HTTP Port, HTTPS…)
  
  
• Network Element access restricted by System TID, Group Code, IP port, User log in name.
  
  
• Dial-up Modem access
• Dial in to the SA-8000 to access a Network Element
• Dial out from the SA-8000 to a remote dial-in only Network Element location
• IP access to the SA-8000
• IP access into remote NE’s through the SA-8000
• Specific equipment access can be assigned to a specific username
• Configure NE access by a specific work Group, for a vender to access their equipment for warranty or maintenance agreements, for temporary work help.

 

• Connectivity
  
  
• Standard connectivity to Network Elements
  
  
• No special software required
• Connection type set per NE
  
  
• Telnet (allows the use of the NE Command Line Interface (CLI) and Internal Management software for NE access, test and management)
• Browser (for NE’s with internal web-server)
  
  
• No Client software application required, not tied to any specific operating system
  
  
• Optional Holly Street software to allow vender specific application software to be run from a remote location
• Optional Holly Street software that will only allow NE connectivity if installed on the client PC
  
  
• Connect to remote NE through Holly Street SA-8000, Terminal Server or directly
  
  
• System Logs
  
  
• Systems logs allow visibility to activities that were processed through the SA-8000. This includes who logged on, at what time, the Network Element accessed and what was done to that NE.
  
  
• Serial Setup per Serial Device/Global Serial Setup
  
• The SA-8000 provides a process to configure each serial connection parameters on an individual basis or on a global basis
  
  
• Primary/Secondary IP Address with Port Number
  
  
  • Provides the user a method to assign a Primiary IP Address with a target Port number and to assign a secondary IP Address. This allows the SA-8000 to be usen on a "public" IP network and remain hidden from general searches.